Now the backup has been created and successful. IP is all right on the HMI and your PC has the right IP – you’re good. And then we’re going to start the backup process, as long as we have an Ethernet cable connected. So, let’s now set the file structure by pressing the three dots… and I’m just going to name this today’s date “6-6-17” so I know what it is. I just normally do a complete backup to make it easy. So, let’s go back to our other PC, and we’re set up for TP700 Comfort, Ethernet “192, 168, 0.2.” Go to “Backup” – this is how you are going to backup. Now here we’re going to press “Transfer,” so we can start the connection for ProSave. And then OK and let’s close out of our Control Panel. If we don’t know what the IP address is, you can just go to “Properties” right there and then you can go to “PN_X1” which is your Ethernet port, and see it’s “192, 168, 0.2.” Say OK, and let’s close out this. So, let’s get on the HMI and “Stop the Runtime.” Go to “Settings” or “Control Panel” and then go to “Transfer Settings.” Then on this list, we’re going to choose Ethernet. So, let’s go check our transfer settings. Now what we need to do is double check that we have our HMI set up for Ethernet. Typically, I just go to My Wireless, click “Open Network and Sharing Center,” and then I click my Local Area Connection and then you just press “Details” and that will tell you what your network adapter is on your PC’s IP – See “192, 168, 0.98.” You will need to set the IP of the computer to something other than the HMI. Let’s stop right here and check our PC’s IP and this is how you would do it. I am going to choose Ethernet because I could just type in a straight IP address, and I know the IP address of the panel is. I have a Comfort Panel TP700, and this is where you make your connection. Alright let’s open up ProSave and let’s choose the device that we’re going to be connecting up to.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
June 2023
Categories |